Samson S2000 Instruções de Operação descarregar pdf (Página 39)

the follower plate (3) and fix with the

screws (14.1).

5. Place the bracket with the sensor at the

NAMUR rib in such a manner that the

follower pin (2) rests in the slot of the fol

lower plate (3), then screw the bracket

using its fixing screws onto the valve.

4.7.3 Mounting the position

sensor to Type 3510

Micro-flow Valve

For the required mounting parts and the ac

cessories, refer to Table 7 on page

46.

1. Place the lever (1) in mid-position and

hold it in place. Unscrew the nut (1.1)

and remove the standard attached lever

M (1) together with the disk spring (1.2)

from the sensor shaft.

2. Screw the position sensor (20) onto the

bracket (21).

3. Select the lever S (1) from the accesso

ries and screw the follower pin (2) into

the hole for pin position 17.

Place the lever (1) and disk spring (1.2)

on the sensor shaft.

Place the lever (1) in mid-position and

hold it in place. Screw on the nut (1.1).

4. Place the follower clamp (3) on the stem

connector, align it at a right angle and

screw tight.

5. Position the bracket (21) with the positi

on sensor on the valve yoke and screw

tight, making sure the follower pin (2)

slides into the groove of the follower

clamp (3).

EB 8384-4 EN 39

Attachment to the control valve – Mounting parts and accessories

20 21

1.1

1.2

Fig. 19 · Mounting on a micro-flow valve

1 Lever

1.1 Nut

1.2 Disk spring

2 Follower pin

3 Follower clamp

20 Position sensor

21 Bracket

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 123 124

Comentários a estes Manuais

Sem comentários

Samson S2000 Instruções de Operação Página 39

Comentários a estes Manuais

Manuais e produtos relacionados com Amplificadores áudio Samson S2000