Samson DOUBLE BRAID Class II Eye Splice Modified for TS-I Manual do Utilizador Página 1

Consulte online ou descarregue Manual do Utilizador para Ferramentas Samson DOUBLE BRAID Class II Eye Splice Modified for TS-I. Samson DOUBLE BRAID Class II Eye Splice Modified for TS-II and TS-II Premium User Manual [en] Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 5
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
PAGE 1 OF 5
SamsonRope.com | Email [email protected] | Tel +1.360.384.4669
Double Braid Class II Eye Splice Modified for TS-II and TS-II Premium
SAMSON SPLICING INSTRUCTIONS
For all measurements use d 1 size larger than rope.
Note: For 1/2" use 9/16" d, for 5/8" use 3/4" d, etc.
1
step
Tie the rope to a xed object approximately 12 d lengths
from the end, then place pin through cover and core near knot.
1A
Slide taped end of cover back from end of core. Measure 1/4 d length
from end of exposed core and make a mark. Cut core off at mark.
1b
Leaving a small amount of core protruding from cover, grasp the taped end
tightly with one hand, and with the other hand milk the cover back towards the
pin. Pin back cover slack. Place second pin to hold back cover slack.
Note: Fid length for measurement
purposes is 21 x rope diameter.
Example: For 5/8" rope use 3/4" fid.
Fid length = .75 x 21 or 15.75"
1/4 fid length
Cut here
Toward pin
First pin
Second pin
knot
PREPARING THE ROPE
From taped end, measure 1 d length and make Mark 1. From Mark 1, measure
another d length and make Mark 2. From Mark 2, form desired eye size and make
Mark 3. At Mark 3, press felt pen through cover and make a mark on the core.
2
step
2A
Straighten the rope out and place a pin through cover and core between
Marks 2 and 3. Remove the pin holding back the extra cover slack and milk
the cover slack back towards Mark 3.
Mark 2
Mark 1
Mark 3
Mark 1Mark 2Mark 3
pin
Cover slack
MEASURING AND MARKING
Vista de página 0
1 2 3 4 5

Resumo do Conteúdo

Página 1 - MEASURING AND MARKING

PAGE 1 OF 5SamsonRope.com | Email [email protected] | Tel +1.360.384.4669Double Braid Class II Eye Splice Modified for TS-II and TS-II Premiu

Página 2 - MARKING THE CORE

PAGE 2 OF 5SamsonRope.com | Email [email protected] | Tel +1.360.384.4669Double Braid Class II Eye Splice Modified for TS-II and TS-II Premiu

Página 3 - TAPERING THE COVER

PAGE 3 OF 5SamsonRope.com | Email [email protected] | Tel +1.360.384.4669Double Braid Class II Eye Splice Modified for TS-II and TS-II Premiu

Página 4 - INSERTING COVER INTO CORE

PAGE 4 OF 5SamsonRope.com | Email [email protected] | Tel +1.360.384.4669Double Braid Class II Eye Splice Modified for TS-II and TS-II Premiu

Página 5 - FINISHING THE SPLICE

PAGE 5 OF 5SamsonRope.com | Email [email protected] | Tel +1.360.384.4669Double Braid Class II Eye Splice Modified for TS-II and TS-II Premiu

Comentários a estes Manuais

Sem comentários